|
0050-0080
HDMI Signal amplifier
Capability: Extends TMDS Cable Reach to Projectors or Monitors Using DVI or HDMI Interfaces Extends TMDS Interface Length as Follows: *0 to 50 Meters Over HDMI / DVI-cable,24 AWG STP (Shield-Twisted Pair) *0 to 36 Meters Over HDMI / DVI-Cable,28 AWG STP *0 to 30 Meters Over HDMI / DVI-Cable,30AWG STP *It can transfer perfectible perfectible digital video signal by using the cable that with long distance extension. *it can extend the HDTV signal source by the display of HDTV *Support 480i,480p,720i,720p,1080i, and the high frequency resolving ratio reaches 1080P and computer reaches 1920X1440. *Support HDMI 1.3 completely. *Support DDWG standards and be compatible with HDCP. *Adopt out connect design that without the system compatible that may cause by inside insert car. *The signal transfer reaches 60M(the available distance is 30M for both input and output). *Apple HDMI port///////'//i//i//i/s high parse screen. *For many kinds of setup environments,it can be used with compatible HDMI. *Be compatible with Home Theater,Home Entertainment locations and so on,.it can connect DVD,STB,image audio transfer/receiver and projector thatwith DHMI interface. *Support HDTV high drawing TV with 1920x1440 high parse. *Supply solution with lower cost for Home Theater. *Plug and play,and shortcut setup *Fully Automatic Equalization Up to 40dB at 825MHz (1.65Gbps),No System Control Required Technical indicate *Video Frequency amplifier bandwidth: 1.65 Gbps *Input video frequency signal level: 1.2 volts p-p *Input DDC signal level: 5 volts p-p (TTL) *Single-route connectable signal range:1080p/1920x1200 *HDMI connect port:A type 19 pin female
Size: 7X2X5.5 cm
|
-
1 x HDMI Signal amplifier |
M |
|