Item Name: SURECOM cross band & Duplex Controller SR-628 PCB for D.I.Y.
USD 39.90
Quantity: 0
SURECOM cross band & Duplex Controller SR-628 PCB for D.I.Y.
Description
0091-802-003
SURECOM cross band Duplex Repeater Controller PC Board
Features
The SR-628 is a multi-function and cheaper device that connects any handheld or mobile radio.
By equipment and so on our assemble the build, the new generation trunk-line board, the internal structure design are finer, the outward appearance is more attractive. Besides can provide a the basic repeater function which has following the receiver transmitter, furthermore has the Simple connection, provides the more ideal 2-way radio conversation region for you, causes you maintains the relation in the bigger operating region.
When the radio units are connected, the received signal on a radio unit will be real time transmit on the other radio unit.
e.g. VHF/VHF, UHF/UHF, VHF/UHF or UHF/VHF modes Input A: Channel A is TX When channal B is RX. Input B :Channel B is TX When channel A is RX .
The purpose can be done in two different places and using different frequency bands intercom, through our mutual communication relay station.
This is a radio cross band duplex repeater controller. It is an easy of operation and cost effective and highly flexible platform for setting up bi-direction cross band duplex repeater with mobile radio and handheld radio.
The SR-628 has 2 audio ports input and out , they are used to connect with mobile and handheld radio. DTMF remote control function with password protection is available in the . User can control the repeater ON or OFF remotely by DTMF. Multi-LED display 2 of radio status
Major Features
Design for D.I.Y.use ( Red switch and battery is no use from PCB)
Always Power on when it have DC voltage (without ON/OFF by manual )
Works with most popular handheld radios
DTMF for change mode of cross band & Duplex
Multi- LED display 2 radio status
Real time duplex repeater with link radio
Allows user to change the DTMF remote control password by radio
External DC 5~24V power supply
DTMF remote control repeater function ON and OFF with password protection
Professional manufacturer low power consumption .
Connector Radio unit:
2
Ext.DC Jack 5.5/2.1mm:
DC 5V~24V
Standby Current:
4mA
Work Current:
20-30mA
Size:
110x80x25mm
LED DISPLAY
Charge
Red DC in
Blue Full
Power
Red Power on
Red flash Sleep mode
Status
Red Radio A RX , B TX
Blue Radio B RX , A TX
Photo will have chromatic aberration compared with the product
PACKAGE CONTAIN
1 x Ccross band Duplex Repeater Controller P.C.B. (POWER ON VER)
VERTEX STANDARD MIC :MH-25A8J / MD-11A8J VERTEX STANDARD Radio VX-2000 VX2200 VX-2208 VX-2500 VX2508 VX-3000 ,VX-3200 ,VX-4100 VX-4100E VX-4200 VX-4200E,VXR-1000 VXR-7000
YAESU MH-26G8J,MH-27G8J,FT-2400H,FT-2500M
Cable Detail:
Plug to Radio 8 pin
Plug to Mobile Audio out : 3.5mm x15mm mono.
Plug to Surecom Repeater in : 3.5mm x17mm 4 polo
Pin 1 : Down
Pin 2 : Up
Pin 3 : +5V
Pin 4 : GND
Pin 5 : MIC
Pin 6 : PTT
Pin 7 : GND
Pin 8 : Fast Scan
SURECOM Repeater controller Mobile Cable
8 pin >
50-A
UP
DOWN
+5V
Keypad
50-B1
50-C1
Keypad
N/C
+8V
N/C
50-K
N/C
+8V
N/C
Keypad
50-Q1
50-S
DATA
+8V
Up/Do
+8V out
50-T1
GND
UP
DOWN
+5V
Keypad
50-W1
S.P.out
50-Y2
Fast
Scan
+5V
UP
DO
QYT
CB-27
+9V
GND
MIC
PTT
BQ-8900
N60
GND
PTT
MIC -
MIC +
8 pin >
6PIN
50-K
+8V
N/C
50-Y1
SW2
9600bs
+9V
If your radio model is not listed above, or not sure whether it fit your radio.
Please kindly see our other item or email us your model number, then we will help you find one that suit for you.
ENGLISH MANUAL
How to set function mode from SR-112/SR-328/SR-628/SR-629
FUNCTION / MODEL
SR-112
SR-328
SR-628
SR-629
Repeat
## 71
No Function
Power On
Press Red switch 2 sec.
by Switch
Mode select
No
YES
A- RX control to B-TX mode 1
No
DTMF PUSH PTT "##612"
Switch to LEFT
A- RX control to B-TX
B- RX control to A-TX mode 2
No
DTMF PUSH PTT "##613"
Switch to RIGHT
SLEEP mode on
PUSH PTT DTMF"##28888"
No
SLEEP mode off
PUSH PTT DTMF "##18888"
No
Surecom all model Repeater controller function Compare