ICOM IC-V82 VHF FM Transceiver 136-174 Radio

ICOM IC-V82 VHF FM Transceiver 136-174Mhz Radio

Optional digital unit, UT-118 The optional UT-118 provides D-STAR format digital voice and slow data communication. The UT-118 includes the following digital features(*The UT-118 is not include in this set). Callsign calling In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory. Position exchange with external GPS receiver When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible. * NMEA 0183 output and RS-232C interface are required. ** Position mapping software required (Not supplied by Icom ). And more digital features 20-character short data message Digital code squelch EMR communication Digital pocket beep Stand-by beep 7W powerful output power A powerful 7W output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time. 200 memory channels and 10 memory banks Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting bank links. Built-in CTCSS/DTCS Built-in CTCSS/DTCS tone codes provide quiet stand-by and allowyou to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency. CTCSS and DTCS Operation Standard 50 CTCSS and 104×2 DTCS tone squelch operation codes (encode and decode) provide quiet standby and allow you repeater access. A pocket beep alerts you of a call and a tone scan can detect the sub-audible tone in use in the receiving signals. Standard DTMF Encoder and Optional DTMF Decoder 5 DTMF memory channels with up to 24 DTMF codes allow remote operation. The optional UT-108 DTMF decoder unit provides code squelch operation as well as a pager function. Other features Reversible control knob and up/down buttons assignment Durable construction and simple operation 16 DTMF dial memory PC cloning capability GENERAL Frequency range IC-V82 Tx: 136-174 MHz       Rx:136-174 MHz                                                                            Mode : F3E, F2D, [F7W optional] Number of memory ch. : 207 (6 scan edges, 1 call) Antenna connector : BNC (50 ohm) Power supply : 7.2 V DC (6.0 —10.3V DC acceptable, Icom/'/s battery pack only) Frequency stability : ±2.5 ppm -10°C to +60°C Current drain (at 7.2 V DC) :    IC-V82 Tx High (7 Watts) 2.6A Rx Max.Audio 250mA Standby 80mA Power save 30mA Usable temp. range : -10°C to +60°C; +14°F to +140°F Dimensions  (projections not included) : 54(W) × 139(H) × 36.7(D) mm   21⁄8(W) × 515⁄32(H) × 17⁄16(D)in. Weight : 390g; 13.8oz  (with BP-222N)    TRANSMITTER Output power (at 7.2 V DC) :    IC-V82 High 7.0W Mid 4.0W Low 0.5W Spurious emissions : Less than -60 dB Max. freq. deviation : ± 5 kHz/ ± 2.5 kHz (Wide/Narrow) Ext. MIC connector : 3-conductor 2.5(d) mm (1⁄10″)/2.2k ohm    RECEIVER Receive system : Double-conversion super heterodyne Intermediate frequencies : 1st  46.35 MHz   2nd 450 kHz Sensitivity (at 12dB SINAD) : 0.16 µV typ. Squelch sensitivity (at threshold) : 0.11µV typ. Selectivity : more than 55/50dB (Wide/Narrow) typ. Inter modulation : 65dB type. Spurious and Image rejection : 80dB (typical) Audio output power : 300 mW typ. with an 8 ohm load Ext SP connector : 3-connector 3.5 (d) mm (1/8")/8 ohm Exp Data connector : 3-connector 2.5 (d) mm(1/10") Applicable U.S. Military Specifications Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows. Standard MIL 810C MIL 810D MIL 810E MIL 810F Method Procedure Method Procedure Method Procedure Method Procedure Low pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II High temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II Low temp. 502.1 I 502.2 I, II 502.3 I, II 502.4-3 I, II Temp. shock 503.1 I 503.2 I 503.3 I 503.4 I Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I Rain 506.1 II 506.2 II 506.3 II 506.4 III Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4 - Salt fog 509.1 I 509.2 I 509.3 I 509.4 - Dust 510.1 I 510.2 I 510.3 I 510.4 I Vibration 514.2 VIII, X 514.3 I 514.4 I 514.4 I Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV 516.5 I, IV

Each Set PACKAGE CONTAIN 1x IC-V82 VHF FM Transceiver 136-174MHz 1x BNC Antenna 1x Belt clip 1x AC adapter 1x ICOM BC-146 Destop charger 1x ICOM BP-209N 7.2V 1100mAh battery pack 1x English Instruction Manual