QUANSHENG TG-K10AT 10KM UHF400-470MHz High quality walkie talkies TG K10AT Two way radio
To make a call, press and hold the “PTT” Key, then speak to the microphone
in normal tone. Please keep the microphone 3-4CM away from your lips, to make
Release "PTT" to receive.
Long hold to turn on the squelch, release to turn it off.
Function (F) key / Exit key.
Press “F” key to enter Function interface.
Press Exit key to exit
Full frequency pattern, short hold and frequency goes upwardly, “F+A” in
Channel Pattern, short hold and channel goes upwardly.
Frequency pattern, short hold and channel goes upwardly.
Full frequency pattern, short hold and frequency goes downwardly, “F+A”
in MHz downwardly.
Channel Pattern, short hold and channel goes downwardly.
Frequency pattern, short hold and channel goes downwardly.
“F+C” key scan upwardly
Full frequency pattern, scan frequency.
Channel pattern or frequency pattern, scan channel.
01. Output power: 10W
02. Adopting newest polymer Li-ion battery
03. Adopting imported PC material in case to make it strong abrasion resistant
04. 350 hours' super-long waiting time
06. Voice prompt ( Chinese and English )
07. High or Low power adjust
08. Squelch level adjust
09. Wide/Narrow bandwidth
11. PC programmable
12. Multi Scan function
14. Low power alarm
15. DTMF PTT-ID
16. 1750Hz call tone
17. Tail tone Elimination
19. Channel step 5k/10k/12.5k/25k
20. Same frequency / different frequency
|Adjacent Channel Selectivity
|Spurious Response Rejection
|Rated Audio Power Output
|Rated Audio Distortion
||2900Mah Polymer Li-ion
|Weight (with antenna and battery)
||40 pcs per carton
1 xUSER'S MANUAL
1 x walkie talkie QUANSHENG TG-K10AT UHF 400-470MHz
1 x Adapter
1 x Charger
1 x Belt clip
1 x Rope